![background image](http://html2.mh-extra.com/html/icom/ic-f7000/ic-f7000_instruction-manual_4287507062.webp)
59
7
CONNECTION AND INSTALLATION
q
Attach the mounting plates, and tighten the 2 sup-
plied screws (M5
×
8) for each side.
w
Put the mounting bracket on the board, and then
tighten the 4 supplied screws (M5
×
20).
e
Attach the Main unit to the mounting bracket as
shown below.
r
The completed mounting should look like this.
• Mounting on the board
• Overhead mounting
R
WARNING:
mount the mounting bracket with
4 supplied screws to surface which is more than 40
mm thick and can support more than 10 kg. The
unit must be mounted on a
fl
at hard surface only.
Not supplied from Icom
D
Mounting the Main unit
A supplied mounting bracket is available for mounting
the transceiver’s Main unit to a
fl
at surface.