Icom IC-F7000, Instruction Manual

Page: 56 / 68

53
6
SET MODE
Password
(AUS version only)
This item confirms the individual password for ALE
operation. (see p.19)
é -PASSWORD --- - LOCKED
-- PRE - AMP ----- ON
-- VOL - MIN ----- 0
-- OFFSET - TIM -- 0:00
Preamplifier
This item sets the receiver preampli fi er function ON
or OFF. (default: ON)
Turn this item ON when receiving weak signal.
é - PASSWORD ---- LOCKED
--PRE - AMP ---- - ç - ON - å
-- VOL - MIN ----- 0
-- OFFSET - TIM -- 0:00
Minimum audio level
This item sets the minimum audio level.
(default: 0)
Turn this item ON when receiving weak signal.
é - PASSWORD ---- LOCKED
-- PRE - AMP ----- ON
--VOL - MIN ---- - ç - 0 - å
-- OFFSET - TIM -- 0:00
Offset time
Set the offset time between the UTC and local time
within –12:00 to +12:00 in 5 minutes steps.
(default: 0:00)
é - PASSWORD ---- LOCKED
-- PRE - AMP ----- ON
-- VOL - MIN ----- 0
--OFFSET - TIM - - ç - 0:00 - å
If you want to initialize the operating conditions (Quick
set mode setting, Initial set mode setting, VFO fre-
quency, selected channel) without channel contents
or ID contents.
q
Turn the transceiver power OFF, if the transceiver
is powered ON.
w
While pushing and holding both
[
∫ ∫
]
and
[
√ √
],
push
[I/O]
to reset the CPU.
[I/O] [ ∫ ]/[ √ ]
■
CPU reset