![background image](http://html2.mh-extra.com/html/icom/ic-f7000/ic-f7000_instruction-manual_4287507060.webp)
57
7
CONNECTION AND INSTALLATION
■
Antenna
Most stations operate with a whip or long wire (insu-
lated backstay) antenna. However, these antennas
cannot be connected directly to the transceiver since
their impedance may not be matched with the trans-
ceiver antenna connector.
R
WARNING: HIGH VOLTAGE!
NEVER
touch the antenna element/wire while tun-
ing or transmitting.
With a 50
Ω
matched antenna all HF bands cannot be
used. The following antenna matcher or antenna tuner
may be helpful for antenna installation.
D
D
MN-100/MN-100L
ANTENNA MATCHERS
Antenna wire
MN-100/MN-100L
D
D
AT-130/AT-130E
AUTOMATIC ANTENNA TUNER
[E]:
[13.6]:
[START]:
[KEY]:
to antenna element
Control cable (Not supplied from Icom)
Assemble the connector using
the supplied connector kit.
See page 61 for pin assignment.
D
D
Non-Icom tuner
Some non-Icom tuners may be used with the IC-
F7000. Please consult your dealer if you wish to con-
nect one.
D
D
AT-140
AUTOMATIC ANTENNA TUNER
See page 55.