![background image](http://html1.mh-extra.com/html/icom/ic-f6062d/ic-f6062d_operating-manual_4282784028.webp)
25
3
dPMR OPERATION
D
Transmitting a Kill Call
A Kill call allows you to send a command that will disable the
target station.
q
Push
[dPMR Button]
to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push
[CH Up]
or
[CH Down]
to select a desired Individual
ID.
e
Push
[dPMR Button]
again to enter the application selec-
tion mode.
• “
STATUS
” is displayed.
r
Push
[CH Up]
or
[CH Down]
to select “
KILL
.”
t
Push
[Call]
to transmit a Kill call to the selected station.
• “
WAIT
” is displayed while transmitting.
• “
OK
” is displayed when an acknowledgement is received.
• “
FAILED
” is displayed when no acknowledgment is received.
y
After a specified time period, the transceiver will return to
the stand-by mode.
D
Transmitting a Revive Call
A Revive call allows you to send a command that will revive
the (stunned) station.
q
Push
[dPMR Button]
to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push
[CH Up]
or
[CH Down]
to select a desired Individual
ID.
e
Push
[dPMR Button]
again to enter the application selec-
tion mode.
• “
STATUS
” is displayed.
r
Push
[CH Up]
or
[CH Down]
to select “
REVIVE
.”
t
Push
[Call]
to transmit a Revive call to the selected sta-
tion.
• “
WAIT
” is displayed while transmitting.
• “
OK
” is displayed when an acknowledgement is received.
• “
FAILED
” is displayed when no acknowledgment is received.
y
After a specified time period, the transceiver will return to
the stand-by mode.