![background image](http://html1.mh-extra.com/html/icom/ic-f6062d/ic-f6062d_operating-manual_4282784021.webp)
3
dPMR OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
■
Transmitting a call
dPMR operation allows you to make a call to a specific sta-
tion (Individual call) or to a particular group (Talkgroup call).
Other digital mode transceivers on the channel will not re-
ceive a call that does not match their Individual or Talkgroup
ID and/or colour code.
D
General
• Editing an ID
If the transceiver has a key assigned to the TX Code Enter
function, you can edit an ID within the allowable digits.
q
Push
[TX Code Enter]
to enter the ID edit mode.
• The digit to be edited blinks.
w
Push
[TX Code Enter]
to select a desired digit to be ed-
ited.
e
Push
[CH UP]
or
[CH DOWN]
to select a desired number.
r
Push
[TX Code Enter]
to set. The digit to the right will au-
tomatically blink.
t
Repeat step
e
and
r
to input all allowable digits.
y
After editing, push
[TX Code Enter]
to store the setting.
• The transceiver returns to the stand-by mode.
NOTE:
Changing the channel or turning OFF the trans-
ceiver discards the new ID, and returns the original one.
• When no acknowledgement is received
After making a call, the transceiver waits for an acknowledge-
ment for the pre-programmed time period. If no acknowledge-
ment is received, the transceiver automatically repeats the
call 4 times (default). However, when no acknowledgement
is received after each of the calls, an error beep sounds and
“
FAILED
” is displayed. In that case, the transceiver automati-
cally returns to the stand-by mode.
• About the HM-152T
If the optional HM-152T
hand
microphone
is connected, the
keypad allows you to:
- Select an ID list number while in the ID selection mode.
- Select a Status list number while in the status message se-
lection mode.
- Select an SDM list number while in the SDM selection mode.
- Edit an SDM while displaying it. (p. 22)
NOTE:
Depending on the pre-programmed settings, addi-
tional functions can be used with the HM-152T. Ask your
dealer for details.