![background image](http://html1.mh-extra.com/html/icom/ic-f6062d/ic-f6062d_operating-manual_4282784011.webp)
8
2
BIIS 1200 OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Transmitting a status message
You can send a pre-programmed status message to an indi-
vidual station or to group stations.
There are 24 status messages that can be sent, and Status
22 and 24 messages have designated meanings.
Status 22: Emergency
Status 24: GPS request
• Status 22 can also be used as a normal status message by
disabling the designated meaning. However, Status 24 is fixed.
NOTE:
Depending on the pre-programmed settings, the
Priority A channel is always used to send status mes-
sages.
q
Push
[BIIS Button]
to enter the call code memory mode.
• “ ” appears.
• The pre-programmed ID is displayed.
w
Push
[CH Up]
or
[CH Down]
to select a desired Individual
ID or Group ID.
e
Push
[BIIS Button]
again to enter the message selection
mode, then push
[CH Up]
or
[CH Down]
to select a de-
sired status message.
S T A T U S
0 1
T X
S t a t u s
0 1
A status message is displayed.
r
Push
[Call]
to transmit the status message to the selected
station or group.
• “
WAIT
” is displayed while transmitting.
• “
OK
” is displayed when an acknowledgement is received.
• “
FAILED
” is displayed when no acknowledgment is received.
t
After a specified time period, the transceiver will return to
the stand-by mode.