3
dPMR OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20
D
Transmitting a status message
You can send a pre-programmed status message to an indi-
vidual station or to group stations.
There are 32 status messages that can be sent.
q
Push
[dPMR Button]
to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push
[CH Up]
or
[CH Down]
to select a desired Individual
ID or Talkgroup ID.
e
Push
[dPMR Button]
again to enter the application selec-
tion mode.
• “
STATUS
” is displayed.
r
Push
[dPMR Button]
again to enter the status message
selection mode.
• The pre-programmed status message is displayed.
t
Push
[CH Up]
or
[CH Down]
to select a desired status
message.
S T A T U S
0 1
T X
S t a t u s
0 1
A status message is displayed.
y
Push
[Call]
to transmit the status message to the selected
station or talkgroup.
• “
WAIT
” is displayed while transmitting.
• “
OK
” is displayed when an acknowledgement is received.
• “
FAILED
” is displayed when no acknowledgment is received.
u
After a specified time period, the transceiver will return to
the stand-by mode.