Icom IC-F6062D, Operating Manual, Page: 12 / 32

9
2
BIIS 1200 OPERATION
D Transmitting an SDM
You can send a pre-programmed SDM to an individual station
or to group stations.
The transceiver has 8 memories to store messages.
q
Push [BIIS Button] to enter the call code memory mode.
• “ ” appears.
• The pre-programmed ID is displayed.
w
Push
[CH Up]
or
[CH Down]
to select a desired Individual
ID or Group ID.
e
Push
[BIIS Button]
again to enter the message selection
mode, then push [CH Up] or [CH Down] to select a de-
sired SDM.
• “ ” appears.
M E S S A G E 1
S D M 1
An SDM is displayed.
Appears
r
Push
[Call]
to transmit the SDM to the selected station or
group.
• “ WAIT ” is displayed while transmitting.
• “
OK
” is displayed when an acknowledgement is received.
• “ FAILED ” is displayed when no acknowledgment is received.
t
After a specified time period, the transceiver will return to
the stand-by mode.
D Direct message input
While displaying an SDM, you can edit or change the mes-
sage using the optional HM-152T
hand microphone
.
q
Push
[BIIS Button]
twice to enter the message selection
mode, then push [CH Up] or [CH Down] to select a de-
sired SDM.
• “ ” appears.
w
Push [ M ] or [#] to enter the message editing mode.
• The first character blinks when
[#]
is pushed, the last character
blinks when
[ M ]
is pushed.
• “ ” blinks.
e
Push the appropriate digit key,
[0]
to
[9]
, to enter a desired
character.
• See the table on the next page for the usable characters.
• Push
[CH Up]
to enter a space, and push
[CH Down]
to delete
the selected character.
r
Push
[#]
to move the cursor to the right, push
[ M ]
to move
the cursor to the left.
t
Repeat steps
e
and
r
to enter a message of up to 12
characters.
y
Hold down
[BIIS Button]
for 1 second to write the new
programmed message into the SDM memory.
• Push
[BIIS Button]
momentarily to cancel editing and return to
the original message display.