![background image](http://html1.mh-extra.com/html/icom/ic-f6062d/ic-f6062d_operating-manual_4282784020.webp)
17
3
dPMR OPERATION
D
Displaying a received call log entry
Depending on the pre-programmed setting, the transceiver
stores up to 10 call log entries. Individual Voice, Status and
SDM call log entries are stored. When an 11th call is re-
ceived, the oldest call log entry will be removed, and the last
received call will be added. When the transceiver is turned
OFF, all the log entries are deleted.
q
Push
[dPMR Button]
twice to enter the application selec-
tion mode.
• “
STATUS
” appears.
w
Push
[CH Up]
or
[CH Down]
to select “
CALL LOG
.”
e
Push
[dPMR Button]
again to display a call log entry.
When the transceiver has a call log entry
V O I C E
0 0 0 0 0 0 1
When the transceiver has no call log entries
N O
L O G
r
Push
[CH Up]
or
[CH Down]
to display a desired entry.
• If a Status or SDM call log entry is selected, not only the calling
station’s ID but also the status message or message are dis-
played.
t
Push
[dPMR Button]
again to return to the stand-by mode.
NOTE:
Depending on the pre-programmed settings, push-
ing
[Call]
while displaying a call log entry makes a Voice
call using the entry’s ID. However, if a Status or SDM call
log entry is selected, the transceiver makes a Voice call
using the last selected Individual or Talkgroup ID.