3
dPMR OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
22
D
Direct message input
While displaying an SDM, you can edit or change the mes-
sage using the optional HM-152T
hand
microphone
.
q
Push
[dPMR Button]
twice to enter the application selec-
tion mode.
• “
STATUS
” is displayed.
w
Push
[CH Up]
or
[CH Down]
to select “
MESSAGE
.”
e
Push
[dPMR Button]
again to enter the SDM selection
mode.
• The pre-programmed message is displayed.
r
Push
[CH Up]
or
[CH Down]
to select a desired SDM.
t
Push
[
M
]
or
[#]
to enter the message editing mode.
• The first character blinks when
[#]
is pushed, the last character
blinks when
[
M
]
is pushed.
y
Push the appropriate digit key,
[0]
to
[9]
, to enter a desired
character.
• See the table at right for the usable characters.
• Push
[CH Up]
to enter a space, push
[CH Down]
to delete the
selected character, and hold down
[#]
for 1 second to delete all
the characters.
u
Push
[#]
to move the cursor to the right, push
[
M
]
to move
the cursor to the left.
i
Repeat steps
y
and
u
to enter a message of up to 100
characters.
o
Hold down
[dPMR Button]
for 1 second to write the new
programmed message into the SDM memory.
• Push
[dPMR Button]
momentarily to cancel editing and return
to the original message display.
• Usable characters
Key
[0]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
Characters
0 ! ? ' " , ; : _ ( ) < > [ ]
1 (space) # * / + - = & % $ @ ^
2 A B C a b c
3 D E F d e f
4 G H I g h i
5 J K L j k l
6 M N O m n o
7 P Q R S p q r s
8 T U V t u v
9 W X Y Z w x y z
/
!
USING [MESSAGE]:
If the transceiver has a key assigned to the Message func-
tion, you can quickly enter the message editing mode.
q
While in the stand-by mode, hold down
[Message]
for 1
second to enter the message editing mode.
• A cursor blinks for the first character.
w
Follow the step
y
to
i
in the left column.
e
Push
[Call]
to transmit the SDM to the last selected ID.
NOTE:
In that case, you cannot store the programmed
message in the memory. Turning OFF the transceiver dis-
cards the message.