3-1-2
Functions Programmable to Keys
22
The following functions can be assigned to [Emer],
[Side1], [Side2], [Side3], [P0], [P1], [P2] and [P3]
programmable function keys.
Consult your Icom dealer or system operator for details
concerning your transceivers programming.
If the programmable function names are bracketed in
the following explanations, the specific key is used to
activate the function depends on the programming.
CH UP AND DOWN KEYS “UP”
“DOWN”
➥
Push to select an operating channel.
➥
Push to select a transmit code channel after pushing
[TX Code CH Select].
➥
Push to select a DTMF channel after pushing [DTMF
Autodial].
➥
Push to select a scan group after pushing and holding
[Scan A Start/Stop]/[Scan B Start/Stop].
➥
Push to select a BIIS code, status number or SDM
after pushing [Digital Button].
ZONE KEY “ZONE”
Push this key, then push [CH Up] or [CH Down] to select
the desired zone.
Note 1: Assigned functional key selection depends on programming
software setup.
Note 2: The functions exclusive to BIIS mode are indicated in Green and LTR mode are indicated in Blue.
➥
Push and hold this key for 1 sec. to indicate the scan
group, then push [CH Up] or [CH Down] to select the
desired group.
SCAN ADD/DEL (TAG) KEY “SCAD”
Push to add or delete the selected channel to/from the
scan group.
PRIO A/B KEYS “PRA”
“PRAR”
“PRB”
“PRBR”
➥
Push to select Priority A or Priority B channel.
➥
Push and hold [Prio A (Rewrite)] to rewrite the Prio A
channel.
MR-CH 1/2/3/4 KEYS “CH1”
“CH2”
“CH3”
“CH4”
Push to select an operating channel directly.
MONI KEY “MON”
Mute and release the CTCSS (DTCS) or 2-tone squelch
mute. Open any squelch/deactivate any mute while
pushing this key.
MONI (AUDI) KEY “MON”
➥
Activates one of (or two of) the following functions on
each channel independently: (PMR or BIIS PMR
operation only)
•
Push and hold to un-mute the channel (audio is
emitted; ‘Audible’
condition).
•
Push to mute the channel (sets to ‘Inaudible’
only).
•
Push to un-mute the channel (sets to ‘Audible’
only).
•
Push after the communication is finished to send a
‘reset code.’
What is “zone”?—
The desired channels are assigned
into a zone according to the intended use for grouping.
For example, ‘Staff A’
and ‘Staff B’
are assigned into a
“Business”
zone, and ‘John’
and ‘Cindy’
are assigned
into a “Private”
zone.
SCAN A KEY “SCNA”
➥
This key’s operation depends on the Power ON Scan
setting.
When the power ON scan function is turned OFF;
Push to start and cancel scanning operation. In case of
transmission during scan, cancels scanning.
When the power ON scan function is turned ON;
Push to pause scanning., then resumes scanning after
passing a specified time period. In case of transmission
during scan, scanning will be cancelled.
➥
Push and hold this key for 1 sec. to indicate the scan
group, then push [CH Up] or [CH Down] to select the
desired group.
SCAN B KEY “SCNB”
➥
Push to start and cancel scanning operation. In case
of transmission during scan, pauses scanning. Scanning
resumes after passing a specified time period.
LIGHT KEY “LIGT”
Push to turn the transceiver’s backlight ON temporarily
only when the backlight function is turned OFF in user
set mode.
LOCK KEY “LOCK”
➥
Push and hold for 1 sec. to electronically lock all
programmable keys except the following:
[Call] (incl. Call A and Call B), [Moni(Audi)] and
[Emergency].
➥
Push and hold for 1 sec. again to turn the lock
function OFF.
NOTE: The un-mute condition (‘Audible’
condition)
may automatically return to the mute condition
(‘Inaudible‘
condition) after a specified period
depending on programming.
