3-2-2
Cloning Items for Conventional Mode
29
The Memory CH, MSK, LTR™, Digital, DTMF, Continuous
Tone, SCAN, 2-Tone, 5-Tone and Common items allow
you to set the transceiver customized.
Memory CH
Set the number of channels and the zone usage for
each zone, and channel attribute, operating frequency,
CTCSS encoder/decoder frequency, transmit output
power, voice scrambling code, etc.
A total of 512 memory channels are available and are
separated into 128 zones. The zone condition setting
screen appears in the Contents List screen by clicking
the Zone Operation icon.
The only programmable zone icons appear and the
memory channels condition in the zone is displayed in
the Contents List screen.
LTR™
(Available only when LMR (LTR™) model is
selected.)
Set the fade timer, beep on receive, beep handshake,
ATB ring back and LSD decode items.
By clicking the Option icon, the setting items appear in
the Contents List screen.
Digital
(Available only when LMR (Digital) model is
selected.)
Set the Talkgroup IDs, RX/TX RAN channels, Status
settings and detail settings for digital mode operation.
By clicking the Talkgroup ID, RAN CH, Status and Option
icon, the setting items appear in the Contents List
screen, respectively.
MSK
(Available only when BIIS PMR model is selected.)
Set the ID range, IDs, messages for status and SDM,
MSK operating condition, etc.
By clicking the ID Range, Own ID/Group, Call List, Status,
SDM, Timing & Error or Config. icon, the setting items
appear in the Contents List screen, respectively.
DTMF
Program DTMF autodial code, emergency code*
1
and
Log/ID code*
1
for the DTMF code transmission, then
program DTMF decode code for DTMF decode
operation*
2
. Then set timers for each digit, 1st digit, [*]
and [#] code.
By clicking the DTMF Autodial, DTMF Decode*
2
or the
DTMF Setting icon, the setting items appear in the
Contents List screen, respectively.
*
1
Available when LMR or LMR (LTR™) model is selected.
*
2
Available when LMR (LTR™) model is selected.
Continuous Tone
Set the continuous tone frequency. The programmed
continuous tone is used for encoder and/or decoder.
By clicking the Continuous Tone or the Continuous Tone
Setting icon, the setting items appear in the Contents
List screen, respectively.
SCAN
Set scan mode, text for each scan group, power save
function scan stop/resume timers, etc.
By clicking the Scan List or Scan Setting icon, the setting
items appear in the Contents List screen, respectively.
2-Tone
Set the code channel details such as 1st/2nd frequency,
text, beep, bell, stun, group call, ANS functions.
By clicking the Code CH or RX Code Setting icon, the
setting items appear in the Contents List screen,
respectively.
5-Tone
Sets RX/TX code, text, 5-Tone format, beep, bell, stun,
group call, answer back functions, etc.
By clicking the RX/TX Code CH, RX/TX Code Setting,
Format or User Tone icon, the setting items appear in
the Contents List screen, respectively.
Common
Sets programmable function keys, function display
assign and several commonly used timers, etc., are
programmable.
By clicking the Key & Display, Set Mode, Common or
Character Editor icon, the setting items appear in the
Contents List screen, respectively.
NOTE: The above instructions are for reference only.
Please refer to the HELP file of the cloning software
for the function or setting details.
Cloning items
