background image

2-5

 

Key Features of 6.25kHz digital

6.25kHz Digital mode ready*
With the optional UT-119H, the IC-F3062 series provides 6.25kHz digital narrow mode 
communication, and increases efficiency of channel allocation and use of spectrum.
The IC-F3062 series provides 2 optional slots: one optional slot for the UT-119H digital unit and 
one for another option board.

*Digital operation may not be allowed in some countries due to regulatory issues. Please ask your dealer for details.

9

NewF3062tal Land Mobile 6.25kHz Technology 
This technology is a new digital communications protocol 
that provides quality voice and data, and is designed as 
a non-proprietary protocol. It accomplishes this by using 
4LFSK (4-Level Frequency Shift Keying) and FDMA 
(Frequency Division Multiple Access).
This method has a number of advantages:

better communication range

simpler design

easy to maintain and service

lower cost for business and industry customers

compatible with existing FM radio hardware

Icom’s has implemented this technology in the F3062 
series. To enable backwards compatibility, the radio is 
both analog and digital and also works in 25 kHz and 
12.5 kHz channel bandwidths (conventional and LTR™

 

trunked operation in analog mode).

Future Applications for 6.25kHz Technology
This new digital land mobile technology can be a 
platform for future integration of IT/IP/VOIP 
technologies. To this end, there are some initiatives 
between a number of manufacturers to promote 
6.25kHz technology more widely. An example is the 
formation of the dPMR MoU in Europe, and the FCC in 
the U.S.A.

 

has recently proposed that system owners 

consider switching to 6.25kHz technology where 
possible. Japan and China are also considering 6.25kHz 
for future digital radio standards.

Multi-site IP Networks

Backwards compatibility to analog only radios enables 
a planned migration path to “digital”

 

with existing 

radios operating analog only and new radios operating 
analog and digital. 

General specifications:

Access Method

 

: FDMA

Transmission Rate

 

: 4800 bps

Modulation

 

: 4-level FSK

Vocoder: AMBE+2™
Codec Rate

 

: 3600 (Voice 2,450 + Error 

Correction 1,150 bps)

In this example, a gateway to the internet is attached 
to each repeater. This enables networks to be built 
using the internet as part of the infrastructure.

Integrated PC and Radio

Here, the PC is connected to the internet to 

communicate through the remote repeater.

Summary of Contents for IC-F4062S








































Reviews: