background image

FOREWORD and DISCLAIMER

2

The information in this document has been carefully checked, and

 

is believed to be correct and accurate. 

However, Icom assumes no responsibility for inaccuracies or mistakes. Furthermore, Icom reserves the right to 
make changes to any of the products described in this handbook without notice or obligation. The systems and 
applications described herein are for information and reference purposes only.

Handbook Revisions
Icom reserves the right to make changes to the content of this handbook at any time without notice or 
obligation.

IPR and Copyrights
The Icom products described in this handbook may include Icom Intellectual Property Rights (IPR) and/or 
copyrighted Icom computer programs stored in radio memories or other media/devices. Such IPR and 
copyrighted computer programs are protected by laws in Japan, the United States and other countries. Any 
Icom IPR and/or copyrighted Icom computer programs contained in the Icom products described in this manual 
may not be copied, reproduced, modified, reverse-engineered, or distributed in any way. Furthermore, the 
purchase of Icom products shall not be deemed to grant any license either directly or by implication, except for 
the normal non-exclusive license to use the product that is specified by law in

 

the sale of a product.

Document Copyrights
No duplication or distribution of this document or any portion thereof shall take place without the express 
permission of Icom. Reproduction, distribution, or transmission for any purpose in any form or by any means, 
electronic or mechanical, shall only be allowed with the express

 

permission of Icom.

Trademarks
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, 
the United Kingdom, Germany, France, Spain, Russia and/or other countries.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other 
countries.

This product when used with certain options, utilizes vocoding technology that is the property of Digital Voice 
Systems Inc.  The AMBE+2™

 

voice coding Technology embodied in this product is protected by intellectual 

property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice 
coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology 
is explicitly prohibited from attempting to extract, remove, decompile, reverse engineer, or disassemble the 
Object Code, or in any other way convert the Object Code into a human-readable form. U.S. Patent Nos. 
#5,870,405, #5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050, #5,630,011, #5,581,656, 
#5,517,511, #5,491,772, #5,247,579, #5,226,084 and #5,195,166.

All other products or brands are registered trademarks or trademarks of their respective holders.

©

 

2007 Icom Inc.

Foreword

Disclaimer

This handbook is prepared to provide detailed information about the IC-F3062 series VHF and UHF HANDHELD 
TRANSCEIVERS. 

Summary of Contents for IC-F4062S








































Reviews: