2-2
Common Features
Lithium-Ion battery pack
The supplied 2000mAh Li-Ion battery pack, BP-232,
provides 14 hours* of operating time. Icom’s rugged
dual-rail guide securely locks the battery to the radio.
The optional battery case BP-240 provides a convenient
back up and great reassurance in an emergency.
* Typical operation Tx:Rx:Stand-by=5:5:90, power save on
Most popular signals built-in
The IC-F3062 series has built-in 2-Tone, 5-Tone, CTCSS
and DTCS signaling capabilities as standard for group
communication or selective calling. Also, the IC-F3062
series can decode ten 2-Tone codes or eight 5-Tone
codes on a channel. When a matched tone is received,
the following actions are programmable for each code.
•
Beep sound •
Bell icon
•
Auto TX
• Answer back call
• Stun/kill radio • Scan
Wide frequency range and large channel capacity
The IC-F3062 series covers a wide frequency range in
one version (VHF 136–174 MHz, UHF 400 –
470MHz).
The 512 memory channel capacity with 128 zones
allows you to divide and store a variety of flexible
channel groupings. Wide, middle and narrow channel
bandwidth (25/20/12.5kHz) is also programmable.
Voting mode scanning
The Voting mode scanning detects the S-meter level of
repeater stations and automatically selects the
strongest station, useful for roaming between 2 or more
repeater sites. In addition, the IC-F3062 series has 10
scanning modes including priority scan and double
priority scan.
Enhanced audio
The IC-F3062 series employs a BTL amplifier that
increases the audio output and the built-in audio
compander provides clear, low noise communications.
6
MULTI-MODE, MULTI-FEATURED BIG AUDIO RADIO
Full dot-matrix LCD
Using a large full dot-matrix LCD (32 ×
18 mm), the IC-
F3062 series shows upper and lower case characters
clearly. The display setting is selectable from 1 line, 12
characters or 2 lines 24 characters via programming.
The bottom row shows assigned functions to the [P0] to
[P3] buttons.
Designed and built for advanced communication needs, the IC-F3062 series handhelds satisfy
your demands with a host of features such as built-in multiple signalings, LTR capability and
large dot-matrix display. The IC-F3062 series provides loud and clear audio even in noisy
environments. Below are some of the common features of this series.
Built-in inversion-type voice scrambler
The built-in inversion type voice scrambler provides
secure conversation as standard. When a more secure
system is required, the 32 code non-rolling-type voice
scrambler UT-109R and 1020 code rolling type UT-110R
are available as an option.
Other features
•
Built-in basic trunking capability.
•
8 DTMF autodial memories
•
2 step reduced power setting
•
Power on password
•
Busy, repeater lockout functions
•
Radio stun and kill functions disable a lost or stolen
unit over the air
•
Surveillance function temporarily turns off the LED
backlight and beep sound
•
Powerful 5W output both VHF and UHF
•
Flash CPU for future upgrade and more...
