![background image](http://html1.mh-extra.com/html/icom/ic-f3062t/ic-f3062t_instruction-manual_4260650021.webp)
17
4
BIIS OPERATION
3
4
Setting example
■
The following functions are assigned to each programmable
key for display example. However, the assigned function can
be changed by your dealer. Ask your dealer for details.
[P0]; Call
: Push to transmit a 5-tone/BIIS call
when the selected channel is a 5-tone
or BIIS channel.
• “
CALL
” is displayed on the key indicator.
[P1]; Digital Button : Push to select the call list ID/transmit
message, or to display the receive
message record for selection.
• “
BIFN
” is displayed on the key indicator.
When this key is pushed, “
BIFN
” is in-
verted as “
.”
[P2]; Null
: No function is assigned.
[P3]; TX Code Enter : Push to enter the ID code edit mode
directly for both 5-tone and BIIS.
• “
TXCE
” is displayed on the key indicator.
[Emer]; Null
: No function is assigned.
[Side1]; Moni(Audi) : Push this key after the communication
to send a ‘Clear down’ signal during
BIIS channel operation.
[Side2]/[Side3]; CH Up/Down
: While in the standby condition, selects
the operating channel.
After pushing [Digital Button] or [TX
Code CH Select], selects call list or TX
code channel, respectively.
Receiving a call
■
Individual call
D
When an individual call is received;
q
• Beeps sound.
• “
” appears and the mute is released.
• The programmed text message (e.g.“
CALLING
”) and the call-
ing station ID (or text) is displayed when the indication mode is 2
lines.
• The programmed text message (e.g.“
CALLING
”) and the call-
ing station ID (or text) is displayed alternately when the indica-
tion mode is 1 line, depending on the setting.
• “
” appears or blinks depending on the setting.
CALLING
0500
TXCE
CALL BIFN
TXC
Appears
Appears or
blinks
Push and hold [PTT], then speak into the microphone at a
w
normal voice level.
• TX indicator lights red.
Release [PTT] to return to receive.
e
• BUSY indicator lights green while receiving a signal.
To finish the conversation, push [Moni(Audi)] to send the
r
‘Clear down’ signal.
• Either station can send a ‘Clear down’ signal.
• “
CLR DOWN
” is displayed for 2 sec. (approx.).
• “
” disappears and the transceiver returns to the standby condi-
tion.
Summary of Contents for IC-F3062T
Page 1: ...INSTRUCTION MANUAL iF4062T S UHF TRANSCEIVER iF3062T S VHF TRANSCEIVER...
Page 46: ...MEMO...
Page 47: ...MEMO...