27
4
BIIS OPERATION
4
BIIS indication
■
The following indications are available for the BIIS operation
on a BIIS channel.
CONNECT
: Individual/group call is successful.
OK
: Message (status or SDM) transmission is suc-
cessful.
FAILED
: No answer back is received.
WAIT
: Appears during retry of the call (2nd call).
CLR DOWN
: End the communication.
BUSY
: Operating channel is in the busy condition.
Priority A channel selection
■
When one of the following operations is performed, the trans-
ceiver selects the Priority A channel automatically.
Priority A is selected when;
• Clear down signal is received/transmitted
- Set the ‘Move to PrioA CH’ item as ‘Clear down.’
• Turning the power ON
The Priority A channel is selected each time the trans-
ceiver power is turned ON.
• Status call
The Priority A channel is selected when transmitting a
status call.
- Enable the ‘Send Status on PrioA CH’ item in the BIIS
configuration.
Summary of Contents for IC-F3062T
Page 1: ...INSTRUCTION MANUAL iF4062T S UHF TRANSCEIVER iF3062T S VHF TRANSCEIVER...
Page 46: ...MEMO...
Page 47: ...MEMO...
