![background image](http://html1.mh-extra.com/html/icom/ic-f3062t/ic-f3062t_instruction-manual_4260650037.webp)
33
6
BATTERY CASE
5
6
Optional battery case (BP-240)
■
When using the optional battery case attached to the trans-
ceiver, install 6
×
AAA (LR03) size alkaline batteries as illus-
trated at right.
Unhook the battery cover release hook (
q
q
), and open the
cover in the direction of the arrow (
w
). (Fig.1)
Then, install 6
w
×
AAA (LR03) size alkaline batteries.
(Fig.2)
• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
Fit the cover in the direction of the arrow (
e
e
), then close
(
r
). And hook the battery cover release hook until it makes
a ‘click’ sound (
t
). (Fig.3)
CAUTION:
• When installing batteries, make sure they are all the
same brand, type and capacity. Also, do not mix new and
old batteries together.
• Keep battery contacts clean. It’s a good idea to clean bat
-
tery terminals once a week.
• Never incinerate used battery cells since internal battery
gas may cause them to rupture.
•
Never expose a detached battery case to water. If the bat-
tery case gets wet, be sure to wipe it dry before using it.
NOTE:
When the optional battery case is attached, the
battery type must be selected to “DRY BATT” when turning
the transceiver ON. ((
☞
p. 11))
q
BP-240
w
Fig.1
Fig.2
Fig.3
e
r
t
Summary of Contents for IC-F3062T
Page 1: ...INSTRUCTION MANUAL iF4062T S UHF TRANSCEIVER iF3062T S VHF TRANSCEIVER...
Page 46: ...MEMO...
Page 47: ...MEMO...