![background image](http://html1.mh-extra.com/html/icom/ic-f3062t/ic-f3062t_instruction-manual_4260650012.webp)
8
2
PANEL DESCRIPTION
SCAN ADD/DEL (TAG) KEY
“
SCAD
”
Push to add or delete the selected channel to/from the scan
group.
PRIO A/B KEYS
“
PRA
” “
PRAR
” “
PRB
” “
PRBR
”
Push to select Priority A or Priority B channel.
➥
Push and hold [Prio A (Rewrite)] to rewrite the Prio A
➥
channel.
MR-CH 1/2/3/4 KEYS
“
CH1
” “
CH2
” “
CH3
” “
CH4
”
Push to select an operating channel directly.
MONI (AUDI) KEY
“
MON
”
Activates one of (or two of) the following functions on
➥
each channel independently: (PMR or BIIS PMR opera-
tion only)
• Push and hold to un-mute the channel (audio is emitted; ‘Audible’
condition).
• Push to mute the channel (sets to ‘Inaudible’ only).
• Push to un-mute the channel (sets to ‘Audible’ only).
• Push after the communication is finished to send a ‘reset code.’
NOTE:
The un-mute condition (‘Audible’ condition) may
automatically return to the mute condition (‘Inaudible‘ con
-
dition) after a specified period depending on program-
ming.
LIGHT KEY
“
LIGT
”
Push to turn the transceiver’s backlight ON temporarily only
when the backlight function is turned OFF in user set mode.
LOCK KEY
“
LOCK
”
Push and hold for 1 sec. to electronically lock all program-
➥
mable keys except the following:
[Call] (incl. Call A and Call B), [Moni(Audi)] and [Emergen-
cy].
Push and hold for 1 sec. again to turn the lock function
➥
OFF.
HIGH/LOW KEY
“
H/L
”
Push to select the transmit output power temporarily or per-
manently, depending on the pre-setting.
• Ask your dealer for the output power level for each selection.
C.TONE CH ENT KEY
“
TSEL
”
Push to select the continuous tone channel using [CH Up]/
[CH Down] to change the tone frequency/code setting. The
selected channel remains set as the continuous tone channel
until another channel is designated as such.
TALK AROUND KEY
“
TA
”
Push to turn the talk around function ON and OFF.
• The talk around function equalizes the transmit frequency to the
receive frequency for transceiver-to-transceiver communication.
WIDE/NARROW KEY
“
W/N
”
Push to toggle the IF bandwidth between wide and narrow.
• The wide passband width can be selected from 25.0 or 20.0 kHz us
-
ing the CS-F3060
cloning
software
. (PMR or BIIS PMR operation
only) Ask your Dealer for details.
Summary of Contents for IC-F3062T
Page 1: ...INSTRUCTION MANUAL iF4062T S UHF TRANSCEIVER iF3062T S VHF TRANSCEIVER...
Page 46: ...MEMO...
Page 47: ...MEMO...