Icom IC-F3062T, Instruction Manual

Page: 14 / 48

10
2
PANEL DESCRIPTION
ID-MR SELECT KEY “
IDMS
”
(PMR or BIIS PMR operation only)
Recalls detected ID codes.
➥
• Push this key, then select the ID code using [CH Up]/[CH
Down].
• Up to 5 ID’s are memorized.
Push and hold to erase the selected ID’s.
➥
SCRAMBLER FUNCTION
“
SCR
”
Push to toggle the voice scrambler function ON and OFF.
COMPANDER KEY “
COMP
”
Push to toggle the compander function ON and OFF.
The compander function reduces noise components from the
transmitting audio to provide clear communication.
USER SET MODE KEY “
SET
”
Push and hold to enter user set mode.
➥
• During user set mode, push this key to select an item, and
change the value or condition using push [CH Up]/[CH Down].
Push and hold this key again to exit user set mode.
➥
OPT OUT KEYS
“
OP1
” “
OP2
” “
OP3
”
Push to control the output signal level of the optional ports in
the optional unit connector.
OPT MOMENTARY KEYS “
O1M
” “
O2M
” “
O3M
”
Push and hold to control the output signal level of the optional
ports in the optional unit connector.
DIGITAL BUTTON KEY “
BIFN
”
(BIIS operation only)
Push to select the call ID list, transmit message and
➥
standby condition. Toggles between queue channel and
received message record indication after queue channel
is selected.
Push and hold to select queue channel indication.
➥
STATUS UP/DOWN KEYS “
BIUP
” “
BIDN
”
(BIIS operation only)
While in the standby condition, push to display the transmit
➥
status indication and select a status number.
When a received SDM is displayed, push to cancel the
➥
automatic scroll and scroll the message manually.
When an SDM that contains more than 12 characters is
➥
displayed, push to scroll the message manually.