![background image](http://html2.mh-extra.com/html/icom/ic-7300/ic-7300_basic-manual_4107742038.webp)
4
RECEIVING AND TRANSMITTING
4-8
∂
TX function
The
∂
TX function shifts the transmit frequency up to
±9.99 kHz without shifting the receive frequency.
1. Push
TX
.
•The
∂
TX function turns ON.
L
Pushing
TX
turns the
∂
TX function ON or OFF.
L
While using the Fine Tuning function (p. 3-3), the
∂
TX
frequency is displayed in 4 digits, instead of 3.
2. Set the
∂
TX frequency to match the receiving
station’s frequency.
∂
TX frequency
L
To reset the
∂
TX frequency to “0.00,” hold down
CLEAR
for 1 second.
L
You can add the frequency shift to the operating
frequency by holding down
TX
for 1 second
.
3. After communicating, push
TX
to turn the
∂
TX
function OFF.
D
∂
TX monitor function
When the
∂
TX function is ON, you can directly monitor
the operating frequency by holding down
XFC
.
Rotate
Set
∂
TX
frequency.
While holding down
XFC
.
Monitor function
The Monitor function enables you to monitor your
transmit audio. Use this function to check the
voice characteristics while adjusting transmit audio
parameters.
L
You can hear the CW sidetone regardless of the Monitor
function setting.
1. Select the mode that you want to monitor.
(Example:USB)
2. Push
FUNCTION
.
•Opens the FUNCTION screen.
3. Touch [MONI] to turn ON the Monitor function.
L
Touching [MONI] turns the Monitor function ON or OFF.
FUNCTIONscreen(USBmode)
4. Touch [MONI] for 1 second.
5. Adjust MONITOR to the clearest audio output
between 0% and 100%, while speaking at your
normal voice level.
NOTE
: When using the VOICE DELAY (p. 4-7), turn OFF
the Monitor function. Otherwise the transmitted audio will
echo.
Rotate
Push