1
PANEL DESCRIPTION
1-2
Front panel (Continued)
@0
@1
@2
@6
#3
#4
@8
@9
@3
#1
#0
@5
@7
@4
#2
@0
MEMO PAD KEY
MPAD
Sequentially calls up the contents in the Memo
Pads, or saves the displayed contents into the
Memo Pad.
@1
VFO/MEMORY KEY
V/M
(p. 3-1)
Switches between the VFO and Memory mode, or
copies the memory channel contents to the VFO.
@2
CLEAR KEY
CLEAR
Clears the RIT or TX shift frequency.
@3
A/B KEY
A/B
(p. 3-1)
Switches between VFO A and VFO B, or sets the
selected VFO’s frequency to the other VFO.
@4
TX KEY
TX
(p. 4-8)
Turns the TX function ON or OFF.
@5
RIT KEY
RIT
(p. 4-1)
Turns the Receiver Incremental Tuning (RIT)
function ON or OFF.
@6
SPLIT KEY
SPLIT
(p. 4-10)
Turns the Split function ON or OFF.
@7
MULTI-FUNCTION CONTROL
MULTI
(p. 1-6)
Displays the Multi-function menu for various
adjustments, or selects a desired item.
@8
TRANSMIT FREQUENCY CHECK KEY
XFC
(p. 4-8)
Enables you to monitor the transmit frequency while
holding it down in the Split mode.
@9
TX/RX INDICATOR (p. 3-9)
Lights red while transmitting and lights green while
receiving.
#0
NOISE REDUCTION KEY
NR
(p. 4-6)
Turns the Noise Reduction function ON or OFF.
#1
NOTCH KEY
NOTCH
(p. 4-6)
Turns the Notch filter ON or OFF.
#2
TWIN PASSBAND TUNING CONTROL
TWIN PBT
CLR
(p. 4-3)
Adjusts the IF filter’s passband width.
#3
PREAMP/ATTENUATOR KEY
P.AMP
ATT
(p. 4-1)
Turns ON or OFF, and selects one of two receive
RF preamplifiers or turns the Attenuator ON or OFF.
#4
NOISE BLANKER KEY
NB
(p. 4-5)
Turns the Noise Blanker ON or OFF.
