![background image](http://html2.mh-extra.com/html/icom/ic-7300/ic-7300_basic-manual_4107742059.webp)
8
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
8-6
Connectors (Continued)
RTTY Decode Bmud Rmte
(Default: 9600)
Selects the data transfer rate (Baud rate) of decoded
RTTY signals.
USB SEND
(Default: OFF)
You can control transmit and receive from the PC
through the USB port.
Selects the control port to be used for communication
between the IC-7300 and PC, according to the
operating condition.
L
You cannot select the terminal which is already
selected in the “USB Keying (CW)” or “USB Keying
(RTTY)” item.
USB Keying (CW)
(Default: OFF)
You can control transmit, receive and keying from the
PC, through the USB port.
Selects the control port to be used for communication
between the IC-7300 and PC, according to the
operating condition.
L
You cannot select the terminal which is already
selected in the “USB SEND” or “USB Keying
(RTTY)” item.
USB Keying (RTTY)
(Default: OFF)
You can control transmit, receive and RTTY (FSK)
from the PC, through the USB port.
Selects the control port to be used for communication
between the IC-7300 and PC according to the
operating condition.
L
You cannot select the terminal which is already
selected in the “USB SEND” or “USB Keying (CW)”
item.
Displmy
LCD Bmcklight
(Default: 50%)
Sets the LCD backlight brightness.
Displmy Type
(Default: A)
Sets the display type to A or B.
Displmy Font
(Default: Basic)
Selects the font for the frequency readout.
Meter Pemk Hold
(Default: ON)
Turns the Meter peak hold function ON or OFF.
Memory Nmme
(Default: ON)
Turns the Memory name display in the Memory mode
ON or OFF.
MN-Q Popup (MN OFF→ON)
(Default: ON)
Selects whether or not to display the Manual Notch
filter width when you select the Manual Notch.
BW Popup (PBT)
(Default: ON)
Selects whether or not to display the PBT shift value
while rotating
TWIN PBT
CLR
.
BW Popup (FIL)
(Default: ON)
Selects whether or not to display the IF filter width and
shift value when you switch the IF filter by touching
the filter icon.
Screen Smver
(Default: 60min)
Sets the Screen Saver function.
This function activates when no operation is
performed for a preset period of time.
Opening Messmge
(Default: ON)
Selects whether or not to display the opening
message at power ON.
My Cmll
Displays text as the opening message, up to 10
characters.
Power ON Check
(Default: ON)
Selects whether or not to display the RF Power level
at power ON.
Displmy Lmngumge
(Default: English)
Sets the display language.