![background image](http://html2.mh-extra.com/html/icom/ic-7300/ic-7300_basic-manual_4107742044.webp)
4
RECEIVING AND TRANSMITTING
4-14
Operating CW (Continued)
EDIT
D
Electronic Keyer function
You can set the Memory Keyer function settings,
paddle polarity settings, and so on of the Electronic
Keyer.
1. Open the KEYER screen in the CW mode.
MENU
»
KEYER
L
You can select [KEYER] on the MENU screen only in
the CW mode.
2. Touch [EDIT/SET].
•Opens the EDIT/SET screen.
KEYER screen
3. Select the desired item to set.
Keyermemoryeditmenu
You can edit the Keyer memories.
001 SET
CW-KEYSET
EXIT
Contestnumbermenu
You can set the number style, count
up trigger, and present number.
Keysetmenu
You can set the memory keyer
repeat time, dot/dash ratio, paddle
polarity, key type, and so on.
D
MonitoringtheCWsidetone
WhenthetransceiverisinstandbyandtheBreak-In
function is OFF, you can listen to the CW side tone
without actually transmitting.
Information
L
• This enables you to match your transmit frequency
exactly to another station’s by matching the audio tone.
• You can also use the CW side tone (make sure the
Break-infunctionisOFF(p.4-12))topracticeCW
sending.
• You can adjust the CW side tone level in “Side Tone
Level.”
MENU
» KEYER > EDIT/SET > CW-KEY SET >
SideToneLevel
EDIT/SET screen
Rotate
Push
4. To close the KEYER screen, push
EXIT
several
times.