Icom IC-400PRO Instruction Manual Download Page 7

Page: 7 / 48

PANEL DESCRIPTION

[DUP] KEY*

➥

Push to toggle the transmit frequency mode between
duplex and simplex. (CB channel 1 to 8 only)

• Duplex: The set TX frequency is used for the transmission.
• Simplex: The set RX frequency is used for the transmis-

sion.

➥

Push and hold to set the selected channel to priority
or normal.

• Priority channel is used for both group and priority scans.

➥

Push to toggle the 5tone mute activity between CONT
(Continuous Tone) and SGL (Single Tone).

• CONT: SelCall mute is released.
• SGL: SelCall mute is activated. In this case, [PTT] switch

action is inhibited while SelCall mute is activated.

[SCN] KEY*

➥

Push to start or stop the scan.

➥

Push and hold to enter the scan type selection mode.

• Push

[

]

[

]

to select the desired scan type.

• Push

[SCN]

to set the channel as a tag channel.

- “

” appears for tag channels.

➥

Push to recall the received ID code.

• Push

[

]

[

]

to select the record.

[MONI] KEY*

➥

Activates the following functions on each channel
independently:

• Push and hold the key to release the mute to the channel

(audio is emitted; ‘Audible’ condition).
- “

” appears.

• During “

” appears, push the key to mute the channel

(sets to ‘Inaudible’).

NOTE:

The unmute condition (‘Audible’ condition)

may automatically return to the mute condition
(‘Inaudible’ condition) after a specified time period
depending on the pre-setting.

➥

Push to transmit the SelCall code on the selected
channel.

➥

Push and hold to enter the SelCall code/code number
selection mode (p. 17).

• Push

[

]

[

]

to select the desired code/code number.

*Information

Up to two desired functions, one each for Normal and
Function mode, can be re-assigned to

[

]

[

]

[

]

[DUP]

[SCN]

and

[MONI]

keys with the optional CS-

400PRO

CLONING SOFTWARE

. (p. 34)

The default setting is used in this instruction manual, for
description.

➥

: Stands for Normal mode operation.

➥

: Stands for Function mode operation.

IC-400PRO.qxd 03.6.19 6:13 PM Page 2 (1,1)

Summary of Contents for IC-400PRO

















































Search results

Summary of Contents for IC-400PRO

Reviews:

Related manuals for IC-400PRO

Brands by name

Popular brands

Icom IC-400PRO, Instruction Manual

Search results

Summary of Contents for IC-400PRO

Reviews:

Related manuals for IC-400PRO

Brands by name

Popular brands