![background image](http://html.mh-extra.com/html/icom/ic-400pro/ic-400pro_instruction-manual_612125022.webp)
17
6
SELCALL OPERATION
■
General
In addition to the group mode operation for silent stand-by,
the SelCall operation is available. SelCall is an abbreviation
for “Selective Calling”. In Group mode operation, there are 51
ways to make an individual call with CTCSS frequencies ver-
sus 100,000 ways to make an individual call with Selcall using
5tone.
SelCall allows you to selectively call another unit that is oper-
ating on the same channel.
SelCall can also call the entire group on that channel using
group call code.
The caller station code/name, status message, Answer Back
function, automatic scan start function, etc. are available with
SelCall operation. A variety of functions are available depend-
ing on the setting with the CS-400PRO
CLONING SOFTWARE
.
See the help file for setting details.
■
Calling operation
D
TX code channel selection
The
[MONI]
(Call) key (in Function mode) enables you to
change the TX code channel with
[
]
/
[
]
keys.
TX code
is transmit SelCall code. Max. 32 TX code chan-
nels can be pre-programmed into the IC-400PRO using
the optional CS-400PRO
CLONING SOFTWARE
.
To select a TX code channel:
q
While in Function mode, push
[MONI]
(Call) for 1 sec. to
enter the TX code channel selection mode.
• Push
[
O
]
(Bank/Func) for 1 sec. to enter the transceiver into
Function mode.
w
Push
[
]
/
[
]
to select the desired TX code channel.
Push
[
]
or
[
]
The TX code or TX code
channel name (if program-
med) is displayed.
Push
[MONI]
for 1 sec.
IC-400PRO.qxd 03.6.19 6:13 PM Page 17 (1,1)
Summary of Contents for IC-400PRO
