manualshive.com logo in svg

Icom IC-400PRO, Instruction Manual, Page: 6 / 48

Share
Download
Icom IC-400PRO Instruction Manual Download Page 6

1

1

PANEL DESCRIPTION

i

e

q

Function Display (p. 4)

w

u

y

t

r

Speaker

■

Front panel

q

AF VOLUME CONTROL KNOB

Rotate the knob to adjust the audio output level.

• Minimum audio level is pre-programmed.

w

[

]

/

[

] KEYS*

➥ 

Push to select an operating channel.

➥

After pushing 

[

O

]

, push to toggle between CB bank and

Private bank (user programmable channels).

e

POWER SWITCH [

]

Push to turn the power ON and OFF.

• The Automatic scan start function and the password prompt are

available at power ON as optional settings. (The optional CS-
400PRO 

CLONING SOFTWARE

is required.)

r

[

O

] KEY*

➥ 

Push to enter channel bank selection mode.

• In channel bank selection mode, push 

[

]

/

[

]

to select the

desired channel bank.

➥ 

Push for 1 sec. to toggle Function mode, Set mode or
Normal mode.

• Returns to the Normal mode automatically after 30 sec. when

no key operations are performed in Function or Set mode.

Normal mode

Set mode

Function mode

Push 

[

O

]

 

for 1 sec.

IC-400PRO.qxd  03.6.19 6:13 PM  Page 1 (1,1)

Summary of Contents for IC-400PRO

















































Reviews:

No comments