![background image](http://html1.mh-extra.com/html/icom/gm600/gm600_instruction-manual_3592327094.webp)
88
88
10
CONNECTIONS AND MAINTENANCE
■
Handset (HS-98)
[MIC CONNECTOR]
Speaker
Cradle
w
e
q
D
Connection
Insert the connector into the [MIC CONNECTOR] on the
front panel, and tighten the cable nut, as shown below.
q
SPEAKER SWITCH
When the switch is set to the “ ” position:
You can hear the receive audio from the remote controller
speaker.
When the switch is set to the “ ” position:
Mutes the remote controller speaker output.
• You can hear the receive audio from the handset.
Put the handset into the cradle to output the receive
audio from the remote controller speaker.
w
HANDSET CONNECTOR
Insert the connector into the [MIC CONNECTOR] on the
front panel.
e
PTT SWITCH [PTT]
Hold down to transmit, release to receive.
IMPORTANT: When using the optional HS-98
First set the “MIC Type” item to “HS-98” in the Menu
screen. Then, turn OFF the transceiver, and connect the
HS-98. After turning ON the transceiver again, you can use
the HS-98. (p. 81)