manualshive.com logo in svg

Icom GM600, Instruction Manual

Share
Download
Icom GM600 Instruction Manual Download Page 90

84

10

CONNECTIONS AND MAINTENANCE

New2001

 

■

Antenna

A key element in the performance of any communication 

system is the antenna. Ask your dealer about antennas and 

the best place to mount them.

 

■

Fuse replacement

One fuse is installed in the supplied DC power cable. If the 

fuse blows, track down the source of the problem, repair it, 

and replace the damaged fuse with a new one of the proper 

rating.

Fuse rating: 10 A

 

■

Cleaning

If the transceiver becomes dusty or dirty, wipe it clean with a 

soft, dry cloth.

  

DO NOT

 use harsh solvents such as Benzine or 

alcohol, as they will damage transceiver surfaces.

TRANSCEIVER

To the
[NMEA 0183]
connector

OPC-980

To a USB port

OPC-
478UC

PC

 

D

Software maintenance

The Icom customer support center provides the firmware 

file for the transceiver’s maintenance. You can update the 

transceiver’s firmware through a PC.

 

■

Connections (Continued)

Summary of Contents for GM600













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands