![background image](http://html1.mh-extra.com/html/icom/gm600/gm600_instruction-manual_3592327098.webp)
New2001
92
12
TROUBLESHOOTING
New2001
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF.
“NO POSITION”
and “NO TIME” are
displayed instead of
the position and time.
• A GPS receiver is not correctly connected.
• The position and time have not been
manually entered.
• Check the GPS receiver connection.
• Enter the position and time.
p. 82
p. 25
Sensitivity is too low,
and only strong signals
can be heard.
•
The antenna is defective or the coaxial
cable connector is shorted or cut.
• Repair the problem and then reconnect to
the antenna connector.
pp. 82,
83
The communication
cannot be established.
•
The antenna is defective or the coaxial
cable connector is shorted or cut.
• Repair the problem and then reconnect to
the antenna connector.
pp. 82,
83
The received DSC call
content is not printed
out.
•
The printer is not correctly connected, or
the paper is exhausted.
• Check the printer connection or paper.
pp. 82,
83
The Voyage Data has
not been recorded.
• The Voyage Data Recorder (VDR) is not
correctly connected.
• Check the VDR connection.
pp. 82,
83
The transceiver is
locked up, and does
not respond.
• A software error has occured.
• Turn OFF the DC power source, and then
turn it ON again.
p. 86
The transceiver does
not work.
• The transceiver's Phase Lock Loop is
unlocked.
• Contact your dealer.
—