65
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
q
When a Polling Request call is received:
• Alarm sounds.
• The following screen is displayed
and the backlight blinks.
•
“ ” is displayed and “ ” blinks.
w
Push any [Alarm Off]
.
e
Select your desired action.
DSC Task mode
•
Rotate [CH/ENT] to view the call
contents, including the position data.
• See page 28 for details of the Task
mode's software key functions.
r
Push [Standby Mode]
to return
to the Main screen.
D
Receiving a Polling Request call
[Hold]: Holds the RX call task,
and return to the previous
screen.
[ACK ]: Sends an acknowledgment.
[Accept]: Enters the DSC Task mode.
DSC Task mode
•
Rotate [CH/ENT] to view the call
contents.
• See page 28 for details of the Task
mode's software key functions.
r
Push [Standby Mode]
to return
to the Main screen.
NOTE:
When “Polling ACK” is set to
“Auto,” the transceiver automatically
replies to the call. Both the TX and RX
calls are stored in the Transmitted and
Received Call Logs. (Default: Auto)
TIP:
See page 49 for details of
sending an acknowledgement.
