background image

82

82

CONNECTIONS AND MAINTENANCE

10

 

Connections

Transceiver’s rear panel view

Remote alarm output

IEC61162-1 IN (+)
IEC61162-1 IN (–)

GND

Remote alarm input/CLONE

IEC61162-1 OUT (+)
IEC61162-1 OUT (–)

q

 NMEA 0183 CONNECTORS

 

 Connects to IEC61162-1 Out lines of a PC or 

IEC61162-1 sentence format DSC or DSE compatible 

navigation equipment, to receive position data from 

other ships.

 

 Connects to IEC61162-1 In lines of a GPS receiver for 

position data.

    •  A GPS receiver compatible with IEC61162-1 format RMC, 

GGA, GNS, or GLL and VTG sentences is required. Ask 

your dealer about suitable GPS receivers.

t

y

e

w

r

q

Remote alarm output terminal

• 4 V DC*

• Maximum 10 mA*

* When the external equipment is connected between this terminal 

and the GND terminal.

When DSC call that is related to “Distress” as described 

below is received, 4 V DC is output and the key backlight 

blinks.

• Distress call

• Distress acknowledgement

• Distress Relay call

• Distress Relay acknowledgement

• Distress Cancel call

• DSC call whose category is “Distress”

Remote alarm input terminal

When this terminal shorts to the GND terminal, the 

transceiver sends the Distress call.

This terminal can be used as an external distress switch.

Summary of Contents for GM600













































































































Reviews: