![background image](http://html2.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_basic-manual_3514805019.webp)
4
1
INSTALLATION AND CONNECTIONS
New2001
1
BASIC MANUAL
■
Installing in a vehicle
CAUTION: DO NOT
place the main unit or remote
controller where normal operation of the vehicle may be
hindered or where it could cause bodily injury.
CAUTION: DO NOT
place the main unit or remote
controller where air bag deployment may be obstructed.
CAUTION: DO NOT
place the transceiver or remote
controller where hot or cold air blows directly onto it.
Controller DC power
cable
Battery
(12 V)
Controller
cable
Main unit
Installation example
You can install the main unit on the dashboard or the
console of your vehicle with the optional MBF-4
mobile
bracket
.
1. Drill 4 holes where the mounting bracket is to be
installed.
L
Approximately 5.5 ~ 5.6 mm (0.21 ~ 0.22 inch)(d) when
using nuts, approximately 2 ~ 3 mm (0.08 ~ 0.12 inch)(d)
when using self-tapping screws.
2. Insert the supplied screws, nuts and washers through
the mounting bracket and tighten.
3. Adjust the angle to suit your needs.
Mounting
nut
Nut
Spring washer
When using self-
tapping screws
Flat washer
Screw
25º
More than 100 mm
(3.9 inches) height
(recommended)
NOTE:
Contact your car dealer or Icom dealer for advice
for installing in a vehicle.