background image

New2001

53

New2001

New2001

MAINTENANCE

9

BASIC MANUAL

 

Resetting

Occasionally, erroneous information will be displayed when, 

for example, first applying power. This may be caused 

externally by static electricity or by other factors. If this 

problem occurs, turn OFF the transceiver. After waiting a 

few seconds, turn ON the transceiver again. If the problem 

is still there, perform a Partial reset or an All reset.

A Partial reset resets the operating settings to their default 

values (VFO frequency, VFO settings, menu contents) 

without clearing data as listed below:

Memory channel contents

Scan Edge contents

Call channel contents

Call sign memories

Message data

DTMF memory contents

GPS Memory contents

Repeater list

BE CAREFUL!

 An All reset clears all programming and 

returns all settings to their factory defaults. After All 

Resetting, you cannot use the DR function because the 

Repeater List contents are also cleared.

See the Advanced manual for details. (Section 10)

 

D

Partial Reset

Others > Reset > 

Partial Reset

1.  Push [MENU].

2.  Rotate [DIAL] to select “Others,” then push [

ï

].

 •Displays the OTHERS screen.

3.  Select “Reset,” then push [

ï

].

 •Displays the RESET screen.

4.  Select “Partial Reset,” then push [

ï

].

 •

The confirmation dialog “Partial Reset?” is displayed.

5.  Select <YES>, then push [

ï

].

  

 • When the partial reset is completed, “PARTIAL RESET” is 

displayed, then the display automatically returns to the default 

screen.

Summary of Contents for D-STAR ID-4100A

















































































Reviews: