background image

BASIC MANUAL

New2001

New2001

ii

ABOUT THE CONSTRUCTION OF THE MANUAL 

(As of May 2017)

Basic manual (This manual)

Instructions for the basic operations, precautions, 

installations, and connections.

D-STAR Guide (Comes with the transceiver)

Instructions for registering your call sign to a gateway 

repeater and the basic operations of D-STAR.

About the DV Gateway function (PDF type)

Instructions for the system requirements or operations to 

use the DV Gateway function.

 

L

 “About the DV Gateway function” can be downloaded 

from the Icom website.

Advanced manual (PDF type)

Instructions for the advanced operations, as shown below.

 •Memory operation <Advanced>*

 •Scan operation <Advanced>*

 •Priority watch operation

 •D-STAR operation <Advanced>*

 •GPS operation

 •Using a microSD card

 •Voice memory operation

 •Repeater and duplex operations

 •Menu screen <Advanced>*

 •Other functions

 •Options <Advanced>*

 •Bluetooth

®

 operation

 

L

This manual can be downloaded from the Icom website.

*The basic instructions are described on this manual.

TIP:

 

 • You can download each manual and guide from the Icom website, 

http://www.icom.co.jp/world/

.

 

Enter ‘ID-4100’ into the Search box in the site.

 •If necessary, you can see a glossary of HAM radio terms that can be downloaded from the Icom website.

 • To read the guide or manual, Adobe Acrobat Reader is required. If you have not installed it, please download the Adobe 

Acrobat Reader from Adobe Systems Incorporated’s website.

You can see the following manuals to use and understand this transceiver.

Summary of Contents for D-STAR ID-4100A

















































































Reviews: