![background image](http://html2.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_basic-manual_3514805062.webp)
New2001
47
New2001
New2001
RECORDING A QSO ONTO A microSD CARD
7
BASIC MANUAL
■
About the microSD card
NOTE:
The microSD and microSDHC cards are not
supplied. (user supplied)
A microSD card of up to 2 GB, or a microSDHC of up to 32
GB, can be used with the ID-4100A/E.
Icom has checked the compatibility with the following
microSD and microSDHC cards.
(As of May 2017)
Brand
Type
Memory size
SanDisk
®
microSD
2 GB
microSDHC
4/8/16/32 GB
Information
L
• The performance of the cards listed above is not
guaranteed.
• Throughout the rest of this document, the microSD card
and a microSDHC card are simply called microSD cards.
• Before using the microSD card, format all microSD
cards to be used with the transceiver, even preformatted
microSD cards for PCs or other uses. (p. 48)
NOTE:
• Before using the microSD card, read the instructions of
the microSD card thoroughly.
• If you do any of the following, the microSD card data may
be corrupted or deleted.
- You remove the microSD card from the transceiver
while accessing the microSD card.
- You change the external power supply’s voltage while
accessing the microSD card.
- You start the vehicle engine while accessing the
microSD card.
• Do not touch the contacts of the microSD card.
•
The transceiver takes a longer time to recognize a high
capacity microSD card.
• The microSD card will get warm if used continuously for a
long period of time.
• The microSD card has a certain lifetime, so data reading
or writing may not be possible after using it for a long
time period.
• When reading or writing data is impossible, the microSD
card’s lifetime has ended. In this case, purchase a new
one. We recommend you make a backup file of the
important data onto your PC.
• Icom will not be responsible for any damage caused by
data corruption of a microSD card.
TIP:
Saving the factory default data is recommended. To
save data, insert the card into the transceiver’s slot, then
select the “SD Card” item on the MENU screen.
(SD Card >
Save Setting
)