23
3
BASIC OPERATION
New2001
New2001
BASIC MANUAL
■
Setting a frequency
D
Selecting a tuning step
If you select the operating frequency by rotating [DIAL]
in the VFO mode, the frequency changes in the selected
tuning step.
L
The VFO mode scan and the Band Scope function also
use this step to search for a signal.
1. Push [QUICK].
2. Rotate [DIAL] to select “TS,” then push [
ï
].
3. Select a tuning step, then push [
ï
].
Options (kHz):
5.0
6.25
8.33*
10.0
12.5
15
20
25
30
50
Auto*
*Selectable only in the AIR band mode.
•Sets the tuning step, then returns to the standby screen.
L
You can set the tuning step for both the VFO and Memory
mode.
L
You can set the tuning step for each band.
D
Selecting the 1 MHz tuning
You can change the operating frequency in ‘MHz’ steps for
quick tuning.
1. Push [QUICK].
2.
Rotate [DIAL] to select “MHz,” then push [
ï
].
•
Enters the 1 MHz Tuning Select mode.
3. Rotate [DIAL].
•
The frequency changes in 1 MHz steps.
4. Push [
ï
].
•Sets the frequency, then returns to the standby screen.
[QUICK]
[DIAL]
[
ï
]
