TITAN HD USER MANUAL
75
8-21-3 Distance Units
By default the imager is set to measure distance in meters (m). Feet (ft) is also
available. Change the distance unit as follows:
1.
Using the touchscreen, tap the settings icon to open the Settings Menu.
The Function Settings tab opens by default.
2. Next to Distance Unit, tap a unit to select it:
meters (m) or feet (ft)
. Option is
highlighted red when selected. Changes are applied automatically
3. Press the Back button to exit the Settings Menu.
8-21-4 Image Grid
Thermographers can enable a Rule of Thirds grid to assist in centering media
or aligning subjects consistently throughout the capture process. Commercial
photographers can use the grid system to create compelling and well-composed
thermal images.
Enable the image grid as follows:
1.
Using the touchscreen, tap the settings icon to open the Settings Menu.
The Function Settings tab opens by default.
2. Press-and-hold the on the screen; then, drag up or down on the touchscreen
to scroll to Image Grid.
3. Toggle the feature to the On position by tapping its switch. The switch turns
red when active. Disable the feature by tapping the switch again. Switch
turns gray when inactive. Changes are applied automatically
4. Press the Back button to exit the Settings Menu.
A GRID OVERLAY SHOWS ON THE IMAGE DISPLAY WINDOW WHEN THE
IMAGE GRID IS ENABLED. TO REMOVE THE GRID DISABLE THE FEATURE.
2.
