TITAN HD USER MANUAL
51
REGIONAL PARAMETERS CAN DIFFER FROM THE GLOBAL PARAMETERS WHEN
A TARGET DOES NOT HAVE THE SAME CONDITIONS AS THE SURROUNDING
ENVIRONMENT (SEE SECTION 8-17-2 GLOBAL ENVIRONMENTAL SETTINGS).
8-17-1-3 ROI Regional Environmental Parameters
Regional environmental parameters are enabled by default and take into account
emissivity, reflected temperature, and distance to assist users in obtaining
accurate readings. See Chapter... Radiometry to better understand these
settings.
Regional parameters can differ from the global parameters when a target does
not have the same conditions as its surrounding. Global parameters are also
used to adjust atmospheric transmittance and temperature (see
Section 8-17-2
Global Environmental Settings
).
8-17-1-3-1 Enable/Disable Regional Environmental Parameters
Enable/disable the regional parameters of an ROI as follows:
1.
Tap an existing temperature analysis object to select it. A Pop-up Menu
appears at the top of the Image Display Window.
2. Using the touch screen, tap the Regional Parameters icon:
3. Toggle the Regional Parameters option to the On position by tapping the
switch. The switch turns red when active. Disable the option by tapping the
switch again. Switch turns gray when inactive.
4.
Tap ✓ to save changes. Tap X to cancel changes. The window closes.
5. Tap anywhere on the Image Display Window to close the Pop-up Menu.
3.
4.
USERS CAN ALSO CHANGE THE REGIONAL PARAMETER SETTINGS BY
VISITING THE ENVIRONMENTAL PARAMETERS TAB OF THE SETTINGS MENU.
ROI SETTINGS ARE LISTED INDIVIDUALLY UNDER THE FULL FRAME SETTINGS.
