TITAN HD USER MANUAL
27
8-1 How to Charge the Battery
Before using the imager for the first time, charge the battery for a minimum of
4 hours. The battery status is shown by the indicator in the upper-right corner
of the screen. 1 lightning bolt means the device is slow charging while 2 bolts
means the device is fast charging.
The power adapter is used both with the charging base and the camera. The
white cable is preferred when using the charging base and the black cable is
preferred when charging the battery through the camera or via a computer.
8-1-1 Charging though the Device
1.
Plug the Type-C end of the black cable into the device.
2. Plug the USB end of the black cable into the power adapter.
3. Plug power adapter into a 110/120V electrical outlet.
8-1-2 Charging via Power Adapter
1.
Insert batteries into the battery charging base.
2. Plug the Type-C end of the white cable into the device.
3. Plug the other end of the white cable into the power adapter.
4. Plug power adapter into a 110/120V electrical outlet.
8-1-3 Charging via Computer
1.
Plug the Type-C end of the black cable into the device.
2. Plug the USB end of the black cable into USB port on the computer.
3. Power on the computer on to charge.
ENSURE THE IMAGER IS NEAR ROOM TEMPERATURE BEFORE CHARGING THE
DEVICE. DO NOT CHARGE IN EXTREMELY HOT OR COLD AREAS. THE BATTERY
CAPACITY MAY BE DECREASED IF CHARGED IN AN EXTREME TEMPERATURE
ENVIRONMENT.
CHARGING THROUGH A COMPUTER TAKES SIGNIFICANTLY MORE TIME
THAN CHARGING WITH THE POWER ADAPTER.
8.
Operation Instructions
