Management interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator tasks. This feature
enables you to perform Administrator tasks from the remote (Internet) host.
Warning:
Enabling remote access increases risk of illegal access. Make
sure to change default password if remote access is allowed.
LAN IP Setup
Clicking on the header of the “LAN IP Setup” tab will take you to its header
page.
48
LAN TCP/IP Setup
All settings for the internal LAN setup of the Router can be viewed and
changed here.
1. IP Address:
The “IP address” is the internal IP address of the Modem.
The default IP address is “192.168.2.1”. To access the Web Manager User
Interface, type this IP address into the address bar of your browser. This
address can be changed if needed. To change the IP address, type in the
new IP address and click “Apply”. The IP address you choose should be a
non-routable IP.
Examples of a non-routable IP are:
192.168.x.x (where x is anything between 0 and 255), and
10.x.x.x (where x is anything between 0 and 255).
