Connection Using Ethernet (RJ-45) Ports
Although the Modem comes with drivers and enabling software, you don’t have
to install and use them if you simply want to connect to the Internet through the
Ethernet (RJ-45) ports.
Your modem has been pre-activated in the Nordisk Mobiltelefon network.
Connect your computer with the Modem using the provided Ethernet (RJ-45)
cable and you are ready to use the Internet.
Configuring Your PC
The Modem’s Ethernet is configured with DHCP by default. This means that IP
address of your PC is automatically assigned by the EV-DO Modem. If for some
reasons, the PC’s cannot get IP address and cannot make connection to Internet,
use the following steps to check the TCP/IP setting of your “Local Area
Connection”.
1. Click the Start button, select
Settings, and select Control Panel.
Click on “Network and Internet
Connection” icon.
NOTE:
DHCP stands for Dynamic Host Configuration Protocol. Your Modem has
a built-in DHCP server. The DHCP server will automatically assign an IP
address to the computers on the LAN. Be sure to set each client PC’s
TCP/IP settings to “obtain an IP address automatically”.
24
