186
ICC
When a test email transmission is
initiated, completes successfully, or
fails due to an error, the activity
window (refer to section 10.4) will
display appropriate messages such as
those shown in Figure 42 and Figure
43.
Although the test email is sent
immediately, note that due to internet
and/or email server delays, it may take
several minutes to receive test emails.
10.17.2
Alarm Configuration
The gateway supports twenty independently-configurable alarms. As shown in
Figure 44, each alarm has a variety of configuration elements, which will be
explained further below.
Figure 44: Alarm Configuration Box
Alarm Selection:
This drop-down box allows the selection of one of the twenty
available alarms. When an alarm is selected, that alarm’s current configuration
parameters will be populated in the alarm configuration box.
“Enable” Check Box:
If checked, this alarm is active and will be evaluated every
second. If unchecked, this alarm is inactive and will therefore not be evaluated.
DB Address:
Enter the database address that this alarm will continuously
monitor. If the “Data Size” (see below) is set to anything other than 8-bit, then
Figure 42: Activity Window at Test
Email Initiation
Figure 43: Activity Window at Test
Email Successful Completion
