226
ICC
3) Add an XIO element to the
main program.
a) Right click on the ladder
logic rung containing the
MSG instruction in the
MainRoutine window and
select “Add Ladder
Element...” again.
b) The “Add Ladder Element”
window appears.
c) Select the “XIO” element in
the Bit folder. Refer to
Figure 71.
d) Click OK.
4) Configure the MSG instruction.
a) Edit the “Message Control” field on the MSG instruction to use the
previously-created “connection” tag. Refer to Figure 72.
Figure 72: MSG Instruction Tag Assignment
b) Click the message configuration button (“…”) in the MSG instruction.
The “Message Configuration” window will open. Refer to Figure 73.
Figure 73: MSG Instruction Configuration
c) “Configuration” tab settings:
i)
Change the “Message Type” to “CIP Data Table Read”.
Figure 71: Adding an XIO Element
