39
ICC
Note that the multiplier, coupled with the data type, imposes range limitations on
the network data value. For example, if the data type is 8-bit and the multiplier is
0.5, then the network data can have values only up to 127 (since 255 is the
maximum value that can be stored in 8 bits).
Read Enable
Check
Read
to enable reading (the service object will continuously read from the
remote device unless a pending
Write
exists).
Write Enable
Does not apply to input objects.
Check
Write
to enable writing (when values
encompassed by this service object change in the gateway’s database, these
changes will be written down to the targeted remote device).
Priority
This field is used to specify the priority associated with writes for this service
object. Select the desired priority from the dropdown menu.
Service Object Status
If it is desired to reflect the status of this service object, check the
Reflect Status
checkbox and enter a database
address
between 0 and 4080 (0x0 – 0xFF0) at
which to store the status information. For more information on reflecting the
status of service objects, refer to section 8.5.2.
