This printer is designed for use with PLA filament.
PLA is a safe and non-toxic product, there are no known health safety risks when used
in 3D printers.
This printer can be used with ABS but additional protection
needs to be installed !
Only use the printer in a well-ventilated area !
When printing with ABS there is a distinctive “burned plastic” smell. This is quite
normal, but in some cases it may cause headaches, respiratory- and eye irritation.
When printing with ABS it is advisable to add a fume hood (with active carbon filtering
for ductless extraction). Fume extraction is mandatory for use in offices, classrooms
and alike.
Never burn printer filament as toxic gas and vapors will be generated if
exposed to fire.
General safety information :
The 3D printer is not intended for use by persons with reduced physical or mental
capabilities or lack of experience and knowledge !
The 3D printer is not intended for use by children. Children should always be
supervised to ensure that they do not play or perform dangerous activities with the
appliance !
The 3D printer should not be left unattended while it is
printing !
Never use a damaged machine ! Inform the after-sales service.
Keep pets away from the machine !
The Health & Safety information is believed to be correct but does not purport to be all
inclusive and must be used only as a guide.
Manual – ICARUS 3D M2 – 2014 -
9
