iCanView240/250 User’s Guide
5.6. Sensor & Capture Setup
This is the setup page for sensors and video capture conditions. Captured video can be sent to user by FTP or E-
mail upon configuration.
Fig. 5-9 Sensor & Capture Setup
Field/Button
Sub Field
/Button
Description
Sensor 1
Not applicable for iCanView240/250.
For the sensor setup use the OSD menu available from virtual
system controller. [Refer to iNVR user’s guide]
Sensor Setup
Name
Not applicable for iCanView240/250.
It sets the condition of video transmission via FTP or E-mail. The
iCanView240/250 supports 2 types of conditions which are mutually
independent.
1. Sensor initiated: when at least one of the sensor detects
alarm condition.
2. Motion-Detection initiated : when motion is detected from
video channel
Sensor Select Check to enable Sensor initiated capture.
Video Capture
Condition
Motion
Detection
Check to enable motion detection initiated capture.
Rev.1.0 (Dec.2006)
37
Summary of Contents for iCanView 240
