50
Figure 5-22
z
File length: upload file length. When setup is larger than the actual file length,
system will upload the whole file. When setup here is smaller than the actual file
length, system only uploads the set length and auto ignore the left section.
z
When interval value is 0, system uploads all corresponding files.
z
Period 1 and period 2: you can set two periods for one each channel.
System file name is shown as in Figure
5-23
.
Figure
5-23
5.3.6 Alarm
Please refer to chapter 4.6 Alarm Setup and Activation.
5.3.7 Detect
Please refer to chapter 4.5 Detect.
5.3.8 Pan/Tilt/Zoom
The pan/tilt/zoom setup includes the following items. Please select channel first. See
Figure 5-24.
z
Protocol: select corresponding PTZ protocol such as PELCO.
z
Address: input corresponding PTZ address.
z
Baud rate: select baud rate.
z
Data bit: select data bit.
z
Stop bit: select stop bit.
z
Parity: there are three choices: none/odd/even.
After completed all the setups please click save button, system goes back to the
previous menu.
For detailed setup, please refer to chapter 4.9 preset/patrol/pattern/scan.
