46
z
Like the single broadcast address of RFC1918
z
Can not be used in Internet transmission
z
Used for multiple cast broadcast in limited space.
Except the above mentioned addresses of special meaning, you can use other
addresses. For example:
Multiple cast IP: 235.8.8.36
Multiple cast PORT: 3666.
5.3.5.4 PPPoE
PPPoE interface is shown as in Figure 5-14.
Input “PPPoE name” and “PPPoE password” you get from your ISP (Internet service
provider).
Click save button, you need to restart to activate your configuration.
After rebooting, IP camera will connect to internet automatically. The IP in the
PPPoE is the DVR dynamic value. You can access this IP to visit the unit.
Figure 5-14
5.3.5.5 NTP Setup
You need to install SNTP server (Such as Absolute Time Server) in your PC first. In
Windows XP OS, you can use command “net start w32time” to boot up NTP service.
NTP setup interface is shown as in Figure 5-15.
z
Host IP: Input your PC address.
z
Port: This series DVR supports TCP transmission only. Port default value is 123.
z
Update interval: minimum value is 15(Unit: minute)
z
Time zone: select your corresponding time zone here.
Here is a sheet for your time zone setup.
City /Region Name
Time Zone
London GMT+0
Berlin GMT+1
Cairo GMT+2
Moscow GMT+3
New Deli
GMT+5
Bangkok GMT+7
Beijing (Hong Kong)
GMT+8
Tokyo GMT+9
Sydney GMT+10
Hawaii GMT-10
Alaska GMT-9
Pacific Time(P.T)
GMT-8
