32
Backup up status and corresponding prompts.
When there is no backup operation. Backup indication light (LED6) is off. During
the backup process, the indication light (LED6) flashes. The indication light (LED6)
is on after successfully completed the backup.
Importance Notice:
z
Please insert backup device when system is working properly.
z
Once starting back up, do not remove the backup device during the
whole process. It may result in file damage or USB device malfunction.
z
After completed backup, please remove the backup device and then turn
off the power or shut down the system.
4.8
PTZ Control and Color Setup
Note:
All the operation here is based on PELCO protocols. For other protocols,
there might be a little difference.
4.8.
1 Cable Connection
Please follow the procedures below to go on cable connection
z
Connect the dome RS485 port to DVR 485 port..
z
Connect dome video output cable to DVR video input port.
z
Connect
power
adapter to the dome.
4.8.
2 PTZ Setup
Note:
The camera video should be in the current screen. Before setup, please
check the following connections are right:
z
PTZ and decoder connection is right. Decoder address setup is right.
z
Decoder A (B) line connects with DVR A (B) line.
Boot up the DVR, input user name and password.
In the main menu, click setting, and then click Pan/Tilt Control button. The
interface is shown as in Figure 4-29. Here you can set the following items:
z
Channel: select the current camera channel.
z
Protocol: select corresponding PTZ protocol(such as PELCO)
z
Address:
default address is 1.
z
Baud rate: select corresponding baud rate. Default value is 115200.
z
Data bits: select corresponding data bits. Default value is 8.
z
Stop bits: select corresponding stop bits. Default value is 1.
z
Parity: there are three options: odd/even/none. Default setup is none.
